The clinical diagnosis of distal radioulnar joint (DRUJ) instability remains challenging. The current diagnostic gold standard is a dynamic computerized topography (CT) scan. This investigation compares the affected and normal wrists in multiple static positions of forearm rotation.. However, its accuracy has been questioned, as the wrist is unloaded and not placed under stress. This may fail to capture DRUJ instability that does not result in static malalignment between the ulnar head and sigmoid notch. The purpose of this biomechanical study was to evaluate the effectiveness of both dynamic and stress CT scans in detecting DRUJ instability. A customized DRUJ arthrometer was designed that allows for both static positioning, as well as dorsal and volar loading at the DRUJ in various degrees of forearm rotation. Ten fresh frozen cadavers were prepared and mounted in the apparatus. CT scans were performed both in the unloaded condition (dynamic CT) and with each arm subjected to a standardized 50N volar and dorsal force (stress CT) in neutral and maximum pronation/ supination. The TFCC (triangular fibrocartilage complex)was then sectioned peripherally to simulate DRUJ instability and the methodology was repeated. CT scans were then evaluated for displacement using the radioulnar ratio method. When calculating the radioulnar ratio for intact wrists using the dynamic CT technique, values were 0.50, 0.64, 0.34 for neutral, pronation and supination, respectively. When the TFCC was sectioned and protocol repeated, the values for the simulated unstable wrist for dynamic CT were 0.54, 0.62, 0.34 for neutral, pronation and supination, respectively. There was no statistically significant difference between the intact and sectioned states for any position of forearm rotation using dynamic CT. Usingstress CT, mean radioulnar ratios for the intact specimens were calculated to be 0.44, 0.36 and 0.31 for neutral, pronation and supination, respectively. After sectioning the TFCC, the radioulnar ratios increased to 0.61, 0.39 and 0.46 for neutral, pronation and supination. There was a statistically significant difference between intact and simulated-unstable wrists in supination (p = 0.002) and in neutral (p=0.003). The radioulnar ratio values used to measure DRUJ translation for dynamic CT scans were unable to detect a statistically significant difference between stable and simulated unstable wrists. This was true for all positions of forearm rotation. However, when a standard load was placed across the DRUJ, statically significant changes in the radioulnar ratio were seen in neutral and supination between stable and simulated unstable wrists. This discrepancy challenges the current gold standard of dynamic CT in its ability to accurately diagnosis DRUJ instability. It also introduces stress CT as a possible solution for diagnosing DRUJ instability from peripheral TFCC lesions

The emergence of patient specific instrumentation has seen an expansion from simple radiographs to plan total knee arthroplasty (TKA) with modern systems using computed tomography (CT) or magnetic resonance imaging scans. Concerns have emerged regarding accuracy of these non-weight bearing modalities to assess true mechanical axis. The aim of our study was to compare coronal alignment on full length standing AP imaging generated by the EOS acquisition system with the CT coronal scout image. Eligible patients underwent unilateral or bilateral primary TKA for osteoarthritis under the care of investigating surgeon between 2017 and 2022, with both EOS X-Ray Imaging Acquisition System and CT scans performed preoperatively. Coronal mechanical alignment was measured on the supine coronal scout CT scan and the standing HKA EOS. Pre-operative lower limb coronal alignment was assessed on 96 knees prior to TKA on the supine coronal scout CT scan and the standing HKA EOS. There were 56 males (56%), and 44 right knees (44%). The mean age was 68 years (range 53-90). The mean coronal alignment was 4.7 degrees (SD 5.3) on CT scan and 4.6 degrees (SD 6.2) on EOS (p=0.70). There was a strong positive correlation of coronal alignment on CT scan and EOS (pearson. 0.927, p=0.001). The mean difference between EOS and CT scan was 0.9 degrees (SD 2.4). Less than 3 degrees variation between measures was observed in 87% of knees. On linear regression for every 1° varus increase in CT HKA alignment, the EOS HKA alignment increased by 0.93° in varus orientation. The model explained 86% of the variability. CT demonstrates excellent reliability for assessing coronal lower limb alignment compared to EOS in osteoarthritic knees. This supports the routine use of CT to plan TKA without further weight bearing imaging in routine cases

Aim: 1. To assess the role of the CT scan in management of intra-articular fractures of the calcaneum. 2. Does the scan makes any difference to the management decision, obtained from assessing the plain radiograph?. Methodology: This study involved 24 patients with intra-articular fracture of the calcaneum who had both a plain radiograph and a CT scan as a part of their assessment. Three consultants who were blinded to the actual management and names of the subjects were independently asked to grade the radiographs and CT scans, as operative or non-operative, on different occasions. The data was matched to the actual management and was subjected to statistical analysis. Results: The data was non-parametric and related. The SIGN test was used to analyse the agreement between the three observers and if the decisions made in each of the groups were significantly different from the actual management. There was no statistically significant difference, between the management decision from the radiographs or CT and the actual management. The change in management that the CT scan brought about was also assessed for each of the observers using the McNemars test. The CT scan did not make any significant difference to the decision made based on the plain radiographs, on whether to operate or not. A Cochran Q test used to assess the variability of the decisions, showed that there was more inter-observer variability in decision making, using the CT based assessment (Q=9.50, p=0.009) as compared to plain radiographs (Q=3.84, p=0.14). Conclusion: We conclude that, the CT scan should only be requested when a decision is made to operate on the fracture, based on plain radiographs. This may help with pre-operative planning of fracture fixation. It does not have to be obtained as a routine to assess all intra-articular fractures of the calcaneum

Aim: The aim of the study was to investigate the efficacy of the multidetector CT scan in the diagnosis and classification of pelvic and acetabular fractures. Material and Method: 41 patients, 13 women and 28 men suspect for acetabular or pelvic fracture were examined. Patient’s ranged from 15 to 72 years. Fracture classification was based in that of Letournel and Judet. Examination was performed with a Multidetector CT scanner (Phillips-Brilliance), withnmultiple detectors and thin slices of 2 mm Multilevel and three dimensional reconstructions were performed. Results: in 15 patients suspects for pelvic or acetabular fracture in plain xray, the CT scan was negative for revealing a fracture. In the rest 26 patients, there were 19 fractures of the anterior column, 4 fractures of the posterior column, 11 acetabular fractures and 7 sacral fractures. All the fractures were detected at the horizontal plane. MPR views were offered additional information for the sacral and acetabular fractures. In 7 patients the fractures diagnosed only after the CT scan was performed. In these patient plain x-rays were negative for fracture. In 6 patients the treatment algorithm was modified, based on CT scans findings. Conclusion: We believe that MDCT is an appropriate as well as an essential method in patients suspects for pelvic or acetabular injuries. MPR and three dimensional reconstructions are very helpful in revealing the personality of the fracture element very important for classification purposes as well as for planning treatment

Aim: To assess the implications of implementation of the NICE Guidelines for indication for CT scan in head injury patients. Methods and Materials: A retrospective audit of the patients attending our district general hospital with head injuries over a period of one year from October 2004 till Sept 2005. A total of 3150 patients attending the A & E during the study period were diagnosed to have head injuries. The study involved review of the case notes and radiology results of the 135 patients requiring inpatient treatment for head injury. During this tenure the CT scan was requested depending of the clinical judgement of the attending physician. Results: Rigid compliance with the NICE Guidelines during the study tenure would have entailed an additional workload of 36 patients requiring a CT scan, of which 28 patients justified the scan during out of hours period. One elderly patient with a fatal intracerebral bleed was found to have justified an early CT scan on the criteria of more than one vomiting episode and a history of unconsiousness. Discussion: The NICE Guidelines were found to be implemented in most cases admitted during working hours. A reluctance to perform CT scan was encountered during out of hours. A strict compliance with the guidelines would entail on average one additional CT scan every fortnight during the ‘out of hours’ period. Implementation of NICE Guidelines was found to tighten the net (justify CT scan) in order not to miss subtle early signs of potentially fatal head injuries

Aim: The purpose of this study is to define the hip anatomy in cerebral palsy in a three dimensional geometrical manner and then perhaps plan a better surgical reconstruction for these affected hips. Materials & Methods: The case notes and radiographs of 18 patients with cerebral palsy who underwent plain radiographs, axial CT and 3D CT scans from October 1993 to June 1995 were reviewed prospectively all being consecutive. The following indices were measured – acetabular anteversion (AA), anterior axial acetabular index (Anterior AAI), posterior axial acetabular index (Posterior AAI), Total axial acetabular index (Total AAI) and acetabular depth/femoral head diameter (AD/FHD) ratio. Results: The acetabular index, and CEA angle clearly showed the hips to be dysplastic in frontal plane. FAV measurements done on CT scan in our study was 330 on the right and 420 on the left. This was significantly higher than normal in our group of patients. Acetabular anteversion was higher in our series, which contributed to hip instability. There were no patients with acetabular retroversion. The axial acetabular indices suggested predominant anterior than posterior acetabular dysplasia, and the total AAI was suggestive of a flatter and shallower acetabulum. A normal to minimally increased AAI in our study suggests an increase in the size rather than a true malrotation. Conclusions: Our study shows that CT scan analysis is a useful tool in preoperative planning for hip reconstructions. This analysis gives a better idea of the distorted anatomy and a more accurate quantitative and qualitative assessment of the hips

Introduction:. 25% of patients with an unknown primary tumour present to the orthopaedic surgeon with skeletal metastases. The onus is on the orthopaedic surgeon to establish the diagnosis, not only to decrease the patient's anxiety but also because the median survival increases from 6–9 months to 23 months when the primary is identified and allows for specific cancer treatment. The diagnostic work up of an unknown primary includes a multitude of special investigations. Since PET/CT has high sensitivity and specificity for detecting the primary tumours, we asked the question: Can you diagnose the unknown primary in patients with skeletal metastases with a PET/CT?. Method:. We included all PET/CT scans done in our institution between 2010 and 2013 for patients with malignancies known to metastasize to bone (melanoma, breast, lung, head and neck, GIT, other) and all scans done in patients with unknown primaries. After reviewing 686 PET/CT scans, 492 showed metastatic disease, with 78 of these having either spinal or skeletal metastases. Results:. Of these 78 patients, 68 primaries could be detected on the PET/CT scan. Thus the PET/CT detected the primary in 87% of cases. This number could possibly be higher as some were melanoma and breast cancer patients who had already undergone surgical resection. The most common primary detected was lung, followed by a group of other and unknown primaries which included cervical, kidney and thyroid carcinoma. Conclusion:. PET/CT scan is a good modality to use when looking for a primary malignancy in patients who present to the orthopaedic surgeon with bone metastases. We postulate that this might be a possible first line investigation when looking for the primary

Aim: The aim of this study is to evaluate the efficacy of the multidetector CT scan in shoulder fractures and to correlate these findings with those of plain x-rays. Material and Method: A 105 patients with shoulder fracture were examined with a multidetector CT scanner after the acute injury. There were 64 male and 41 female with an average age of 52 yrs (range 16–95 yrs). The examination was performed with a CT PHILIPS BRILLIANCE, and six groups of detectors were used, with thin slices (1.6–2 mm). MPR and three dimensional reconstructions were performed. Results: The mechanism of injury was fall during walk in 66 patients, fall from a height in 11 patients, and road traffic accident in 28 patients. They were detected 210 fractures at the shoulder region. A 135 fractures were located at the proxd imal end of the humerus, 75 at the scapula, in 95 out of 105 patients. In 10 patients with a comminuted fracture of the upper end of the humerus, the exact number of fragments as well as the precise location of them was not accurately assessed with plain xrays. MDCT control with multilevel anasynthesis and three dimensional reconstruction improved the understanding of the anatomic orientation in complex fractures and fractures–dislocations and in detection of subluxation of the fragments of the shoulder headin four part fractures in two patients. Conclusion: Our results would orient us for using the MDCT scan in patients with acute shoulder injury, especially in cases with comminuted fractures, because it is better assessed the place, the orientation and the displacement of fragments, which are not easily identified in plain xrays. Furthermore, these reconstructions improve the preoperative planning in those patients

Mechanical irritation or impingement of the iliopsoas tendon accounts for 2–6% of persistent postoperative pain cases after total hip arthroplasty (THA). The most common trigger is anterior cup overhang. CT-scan can be used to identify and measure this overhang; however, no threshold exists for symptomatic anterior iliopsoas impingement. We conducted a case–control study in which CT-scan was used to define a threshold that differentiates patients with iliopsoas impingement from asymptomatic patients after THA. We analyzed the CT-scans of 622 patients (758 CT-scans) between 2011 and 2020. Out of this population we identified 136 patients with symptoms suggestive of iliopsoas impingement. Among them, 6 were subsequently excluded: three because the diagnosis was reestablished intra-operatively (one metallosis, two anterior instability related to posterior prosthetic impingement) and three because they had another obvious cause of impingement (one protruding screw, one protruding cement plug, one stem collar), leaving 130 patients in the study (impingement) group. They were matched to a control group of 138 patients who were asymptomatic after THA. The anterior cup overhang (anterior margin of cup not covered by anterior wall) was measured by an observer (without knowledge of the clinical status) on an axial CT slice based on anatomical landmarks (orthogonal to pelvic axis). The impingement group had a median overhang of 8 mm [IQR: 5 to 11] versus 0 mm [IQR: 0 to 4] for the control group (p<.001). Using ROC curves, an overhang threshold of 4 mm was best correlated with a diagnosis of impingement (sensitivity 79%, specificity 85%, PPV = 75%, NPV = 85%). Pain after THA related to iliopsoas impingement can be reasonably linked to acetabular overhang if it exceeds 4 mm on a CT scan. Below this threshold, it seems logical to look for another cause of iliopsoas irritation or another reason for the pain after THA before concluding impingement is present

Patient specific instrumentation (PSI) for elective knee replacements in arthritic knees with severe deformities and in revision scenarios is becoming increasingly popular due to the advantage of restoring the limb axes, improved theatre efficiency and outcomes. Currently available systems use CT scan or MRI for pre-operative templating for design considerations with varied accuracy for sizing of implants. We prospectively evaluated 200 knees in 188 patients with arthritic knees with deformities requiring serial clinical assessment, radiographs and CT scans for PSI templating for TruMatch knee system (DepuySynthes, Leeds, UK). The common indications included severe arthritic deformities, previous limb fractures and in obese limbs with difficult clinical assessment. Surgical procedure was performed on standard lines with the customised cutting blocks. The ‘lead up’ time between the implant request and the operating date was 5 weeks on an average. We compared the pre op CT images and the best fit post-operative x- rays. The sizing accuracy for femur and tibia was 98.93 % and 95.75% respectively. All blocks fitted the femur and tibia. There were no bail outs, no cutting block breakage, 1 patient had residual deformity of 20 degrees, and 1 patient had late infection. The length of hospital stay, economic viability in terms of theatre turnover, less operating time, cost of sterilisation in comparison to conventional knee replacement surgery with other factors being unchanged was also assessed. The projected savings was substantial along with improved geometrical restoration of the knee anatomy. We recommend the use of PSI based on CT scan templating in difficult arthritic knees

Introduction:. Fibular malreduction is a common and important cause of pain after surgical fixation following a syndesmosis injury, but it is unclear which components of malreduction correspond to clinical outcome. Plain radiographs have been shown to be unreliable at measuring malreduction when compared to CT scans. A number of published methods for measuring fibular position rely on finding the axis of the fibula. Elgafy demonstrated that fibular morphology varies greatly, and some studies have demonstrated difficulty finding the fibular axis. Methods:. We developed a new method of measuring the distal fibular position on CT images. We used CT studies in 16 normal subjects. Two assessors independently measured the ankle syndesmosis using the Davidovitch method, and our new protocol for fibular AP position, diastasis and fibular length. Results:. We demonstrated that after statistical analysis (Pearson Product Moment Correlation) our method showed improved inter-observer reliability (r = 0.99 and 0.95 vs 0.59 and 0.78 respectively) for diastasis and AP translation, and improved intra-observer reliability (r = 0.99 and 0.99 vs 0.91 and 0.97 respectively). We found inter and intra observer reliability of 0.80 and 0.91 respectively for fibular length, but were unable to find a novel, accurate method for measuring fibular rotation. Conclusions:. Our method is a new, simple, accurate and reproducible system for measuring the ankle syndesmosis. We believe that this method could be used to assess fibular reduction after obtaining CT images of the uninjured side for comparison

Introduction: With increasing availability of CT scans their use in the investigation of the subtalar joint increases, whilst we continue to use plain x-ray. Using a standardised reporting protocol, we graded x-rays and CT scans to compare the diagnosis made using each modality. Materials and Methods: An atlas and reporting system of the subtalar joint was designed using a modification of Kellgren and Lawrence’s system. 50 consecutive CT scans of the subtalar joint were identified and saved along with paired plain x-rays of the foot and ankle. All investigations were anonymised. Scans were excluded if there were no plain films or there was evidence of previous trauma. Orthopaedic surgeons were asked to report on the 50 CT scans and 50 plain radiographs using the reporting protocol, commenting on two components for each investigation; the anterior and middle facets and the posterior facet of the subtalar joint. Results: In 33% of cases the facets of the subtalar joint could not be appreciated from the plain x-rays. The difference between the modalities in reported grade of degeneration of the anterior and middle facets of the subtalar joint was statistically significant (p= 0.014) but not for the posterior facet (0.726). When looking at the Spearman correlation coefficient, the anterior and middle facets had no correlation (r = − 0.067) although the posterior facet did (r = 0.029). Discussion: When looking at the posterior facet of the subtalar joint plain x-rays and CT scans give comparable results. When looking at the anterior and middle facets the information gained from the plain x-rays bears no resemblance to that gained from the CT scans. Conclusion: The plain x-ray is an inaccurate, unreliable method of investigating degenerate pathology of the subtalar joint and should be superseded, and perhaps replaced, by the CT scan

The purpose of the study was to assess the accuracy of prereduction and postreduction obturator oblique radiographic views in the diagnosis of simple posterior hip dislocation, and to ascertain whether, in differentiating simple posterior hip dislocations from fracture dislocation, obturator oblique views are a safe diagnostic tool in the hands of junior registrars, trauma officers and community service doctors. A sample group of prereduction and postreduction radiographs of patients who had sustained posterior hip dislocations (Thompson and Epstein type I to III) was collected. All patients then had CT scans of the hip to confirm the plain radiographic findings. Shown only the radiographs, all junior doctors involved in the study correctly differentiated between simple posterior hip dislocations and fracture dislocations. This has implications for savings in both time and money. If CT scans are unnecessary in simple posterior hip dislocation, the need for transfer and tertiary level hospitalisation is obviated

Aim: To investigate the natural history and the impact of reconstruction in shoulder deformities due to obstetrical brachial plexus palsy. Methods: Pre and postoperative CT scans of bilateral upper extremities of 28 patients with obstetrical palsy were studied. The age during the preoperative CT scan ranged from 1.5 months to 10 years (average: 4 ± 3 years). 17 patients had Erbñs palsy and 11 global plexus involvement. Eighteen had primary shoulder reanimation mainly via intraplexus neurotization. Palliative surgery in 25 patients included trapezius transfer for shoulder abduction, adductors release and rerouting of the latissimus dorsi and terres major for external rotation, scapula stabilization and rotational osteotomy of the humerus. The CT measurements included: humeral head retroversion, spinoscapular angle, glenoid fossa inclination, congruence of the humeral head to the glenoid and distance of the lower angle of the scapula from the midline. Results: Preoperatively the humeral head was subluxated or dislocated posteriorly and had decreased retroversion. The hypoplastic scapula had winging and increased distance from the midline, while the glenoid fossa was more retroverted. Postoperatively all the above measurements were improved. Conclusions: Novel measurements on CT scans of bilateral shoulders provide valuable information. Surgical intervention signiþcantly improves the functional anatomy and the dynamics of the shoulder joint

Scaphoid fractures are commonly seen fractures following distal radius fractures, yet its diagnosis can be difficult. The present study is to explore the diagnostic approach to suspected scaphoid fractures in a district general hospital in the UK. This is a retrospective study. 286 Suspected scaphoid injuries were seen in our Fracture clinics. 184/286 were known to have normal x-ray findings initially and repeat x-ray in 10 days time. They were all treated as a simple case of a sprained wrist. 40 Patients out of the remaining 102 patients were noted to have scaphoid fractures on follow up x-rays and accordingly treated with cast. The remaining 62 patients were considered for further imaging. 28/102 went for bone scan, which confirmed scaphoid fracture in 4/28 cases. It also picked up other degenerative pathology in 4/28 cases. The rest of the scans were normal. 22/102 Were sent for CT scan which identified the fracture in 20 cases. CT scans provided details about the configuration of fracture, level of healing etc. MRI was performed in 12/102 cases, which confirmed fracture in 2/12 cases and bone bruising in 2/12 cases. There is no consensus regarding the investigation of choice when a follow up scaphoid x-ray is inconclusive in diagnosing a possible scaphoid fracture. In this study we note that a bone scan does not offer much information. On the other hand MRI and CT investigations were useful. We recommend the use of an MRI investigation for a fresh injury, and a CT scan for fresh and old injuries

In February 2004, our institute began to perform routine cervical CT scans in addition to head CT examinations on patients with blunt head trauma who had received high energy injuries. We present the findings of 108 patients who underwent a routine cervical CT within the last year and the usefulness of routine cervical CT examinations is discussed. The present report is, to our knowledge, the only prospective study to examine the utility of routine cervical CT examinations. Among the patients admitted to the emergency room of our institute after receiving high energy injuries, 108 patients had blunt head trauma and underwent a routine cervical CT examination in addition to the head CT examination specified by our original protocol for cervical clearance. The mechanism of injury and the presence of cervical bone lesions were noted in each case. 76 males and 32 females ranging in age from 13 to 77 years (average, 41.0 years) were included in the study. Among these 108 cases, cervical fractures or subluxation were visible in 5 cases on plain films. Although no fractures were seen on the plain films taken in the remaining 103 cases, the additional cervical CT examinations demonstrated 14 cervical fractures in 13 (12.6%) of these cases. For patients with blunt head trauma, a cervical CT examination is not usually performed if no evidence of a cervical fracture is found on plain films and no neurological deficits are present. Nevertheless, the present findings suggest that many cervical fractures may have been missed on plain films in the past, and the routine inclusion of a cervical CT examination in addition to a head CT examination might be appropriate in the evaluation of patients with blunt head trauma who have been involved in a high energy injury

Introduction. Occult hip fractures occur in 3% of cases. Delay in treatment results in significantly increased morbidity and mortality. NICE guidelines recommend cross-sectional imaging within 24 hours and surgery on the day of, or day after, admission. MRI was the standard imaging modality for suspected occult hip fractures in our institution, but since January 2013, we have switched to multi-detector CT (MDCT) scan. Our aims were to investigate whether MDCT has improved the times to diagnosis and surgery; and whether it resulted in missed hip fractures. Patients/Materials & Methods. Retrospective review of a consecutive series of patients between 01/01/2013 and 31/08/2014 who had MDCT scan for suspected occult hip fracture. Missed fracture was defined as a patient re-presenting with hip fracture within six weeks of a negative scan. A comparative group of consecutive MRI scans from 01/01/2011 to 31/12/2012 was used. Results. Seventy-three MDCTs and 70 MRIs were included. MDCT identified nine hip fractures and other fractures in 27 patients. Mean time to scan for MDCT was 13 hours 37 minutes compared with 53 hours 36 minutes for MRI scan (p<0.001). 88.5% of MDCTs were performed within 24 hours compared with 33.3% of MRIs. Nine and 16 patients required surgery in the MDCT and MRI groups, respectively. Mean time to surgery for MDCT was 50 hours 41 minutes compared with 223 hours 21 minutes for MRI scan (p = 0.25). There were no missed hip fractures in the patients with negative MDCT scan. Discussion. MDCT scan has led to a significant reduction in time to diagnosis, and a large reduction in time to surgery. MDCT did not miss any hip fractures. Conclusion. We advocate the use of MDCT over MRI in suspected occult hip fractures as it is cheaper, quicker, and more readily available; and does not result in missed hip fractures

We want to prove that you cannot make a good fitting stem of a THP before surgery because the resulting shape of the femoral cavity is set after all the tools have been introduced in the femur. We are fully aware that fit and fill alone is not enough to obtain good fixation therefor all the investigated implants were plasma spray coated with HA. We have investigated two groups of patients:. Pre – operative group: custommade implant based on CT scans and manufactured before surgery. The proximal part was size for size and coated with HA; the distal part is cylindrical (44 cases, followup from 2.6 years to 6.2 years). Per – operative group: custommade implants based on a mould of the femoral cavity in the proximal femur and manufactured during surgery. The prosthesis was size for size and the HA coating was applied on the proximal 1/3 of the implant. (13 cases with a minimum follow-up of two years). The manufacturing procedures and coating specifications for both groups were exactly the same. We’ve compared the Harris hip score for both groups and we’ve performed a radiolographical analysis. Of the preoperative group 6 protheses had to be revised. This results in a revision rate of 13 % which is not acceptable. In the peroperative group however, no revisions have been performed. Radiografically the peroperative group showed much better results than the preoperative group. The obtained results suggest that it is not only important to have a good bone growth initiator such as HA but the implant needs to be in close contact with the bone

Introduction

Primary mechanical fixation and secondary biologic fixation determine the fixation of an uncemented femoral component. An optimized adequacy between the implant design and the proximal femur morphology allows to secure primary fixation.

The femoral antetorsion has to be considered in order to reproduce the center of rotation.

A so-called «corrected coronal plane » including the center of the femoral head has therefore been defined. The goal of this study was to evaluate the proximal metaphysal volume and to design a straight femoral component adapted to this corrected coronal plane.

Aim

To demonstrate the use of indium-111 white-cell labelled SPECT CT (In111-WC-SPECT-CT) in bone infection.