Advertisement for orthosearch.org.uk
Results 1 - 4 of 4
Results per page:
Applied filters
Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_III | Pages 293 - 293
1 Jul 2011
Baring T Cashman P Majed A Reilly P Amis A Emery R
Full Access

Objective: There is no non-invasive gold standard for measuring gap formation following rotator cuff repair; re-tears are reported both on MRI and Ultrasound. We present a novel RSA technique using a combination of 1mm tantalum beads and metal sutures to allow monitoring of gap formation following rotator cuff repair.

Methodology: We carried out ten open rotator cuff repairs with using trans-osseous sutures on patients with moderate to massive tears. During surgery RSA markers were inserted into the shoulder to allow postoperative monitoring of the repair. These markers took the form of 1mm RSA tantalum beads in the greater tuberosity, distal to the repair site, and three metal sutures in tendon, proximal to the repair site. Direct measurements of the distance between the markers each side of the repair were taken intra-operatively (T=O). RSA images were taken of the repair immediately postoperatively (T=1–2 hours), day 3, 2 weeks, 3 months and 1 year post-operatively. Ultrasound imaging was performed at the same intervals by consultant musculo-skeletal radiologists blinded to the RSA data.

Results: At the 3 month stage post-operatively RSA data shows an increase in the average gap between the 2 sets of markers, with considerable variation between patients (5mm to 19mm).

Conclusion: The results are highly suggestive of gap formation in the repair. The greatest increase in gap formation has been seen between 2 weeks and 3 months. During this time patients come out of their abduction arm sling and commence physiotherapy. It may be that due to excessive loading on the repair before it has fully healed has causes failure in some cases.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_II | Pages 353 - 353
1 Jul 2008
Baring T Cashman P Reilly P Amis A Emery R
Full Access

There is no non-invasive gold standard for measuring gap formation following rotator cuff repair; re-tears are reported both on MRI and Ultrasound. Roentgen Stereophotogrammetric Analysis (RSA) has previously been used to monitor microscopic migration of markers in rigid bodies. We present a novel RSA technique using a combination of 1mm tantalum beads and metal sutures to allow accurate monitoring of gap formation following rotator cuff repair. The RSA system combines a commercially made calibration cage with software developed at Imperial College. We verified the RSA system by analysing a movable glass phantom and comparing the data with precise physical measurements of the same object: it identified a 2mm distraction of the phantom to within 0.05mm. In vitro work involved cadaveric human shoulders. We placed three 1mm RSA tantalum beads in the greater tuberosity and three metal sutures in supraspinatus tendon. We then created a tear in supraspinatus at its insertion into the greater tuberosity. We were able to show that RSA images taken before and after the tear correlated closely with direct measurements. The processed data demonstrated movement associated with gap formation. We have performed two open rotator cuff repairs using trans-osseous sutures. During surgery RSA markers were inserted into the shoulder to allow post-operative monitoring of the repair (guided by the in vitro work). Direct measurements of the distance between markers each side of the repair were taken intra-operatively (T=O). RSA images were taken immediately post-operatively (T=1 hours), day 3, day 14, and day 84. The RSA data suggests gapping of typically 3mm may have occurred at the repair sites in both patients. Ultrasound imaging was performed at the same intervals by consultant musculoskeletal radiologists blinded to the RSA data. Preliminary results correlating the two modalities suggest that ultrasound can visualise gap formation accurately even immediately post-operatively.


Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_II | Pages 148 - 148
1 Apr 2005
Khan R Konyves A Cashman P Thomas R Amis A
Full Access

Introduction Roentgen stereophotogrammetric analysis (RSA) is the most accurate radiographic technique for measuring three-dimensional micromotion in joints, and is now being developed for the study of anterior cruciate ligament (ACL) injury and outcome after surgical reconstruction. Using RSA a prospective study of ACL reconstruction is being undertaken. The aim is to obtain accurate information on the performance of both bone-patellar tendon-bone (BPTB) and hamstring grafts post-operatively.

Materials and methods 14 patients with a unilateral ACL tear who underwent ACL reconstruction have been studied prospectively. Seven had BPTB grafts, and seven had four-stranded semitendinosus/gracilis. Tantalum markers were inserted at the time of surgery, 4 each into the femur and tibia, and 8 into the graft, at regular intervals along the length. Stress stereo radiographs (90N anterior and posterior draw forces) were taken at 1, 6, 12 and 24 weeks post-operatively. They were analysed using Medis RSA software.

Results Initial results suggest that in addition to measuring total anteroposterior knee laxity, detailed analysis of the graft itself is possible. Beads placed in the bone blocks of the BPTB grafts, and in the intraosseous ends of the hamstrings, enable calculation of slippage of the fixation. The BPTB bone plugs moved 0.6 to 1.2mm by 12 weeks, the Hamstrings fixation was more variable. Beads placed in the intraarticular graft may enable measurement of any post-operative stretching, but are also somewhat erratic. Identification of the site of stretching – around the tunnel entrances, or intraarticularly, should be possible.

Conclusions We believe that this detailed application of RSA in analysing the performance of the two commonly used grafts in ACL reconstruction has not been previously described. We hope to gain valuable insight into the behaviour of both graft types and reasons for graft failure. This presentation will demonstrate the methods developed and include the technical difficulties encountered in this on-going study.


Orthopaedic Proceedings
Vol. 84-B, Issue SUPP_I | Pages - 94
1 Mar 2002
Holt P Cashman P Bull A McGregor A
Full Access

Low back pain (LBP) is a common problem in rowers of all levels. Few studies have looked at the relationship between rowing technique, the forces generated during the rowing stroke and the kinematics of spinal motion. Of particular concern with respect to spinal injury and damage are the effects of fatigue during long rowing sessions.

A technique has been developed using an electromagnetic motion system and strain gauge instrumented load cell to measure spinal and pelvic motion and force generated at the oar during rowing on an exercise rowing ergometer. Using this technique 13 elite national and international oarsmen (mean age 22.43 ± 0.02 years) from local top squad rowing teams were investigated. The test protocol comprised of a one hour rowing piece. During this session rowing stroke profiles were quantified in terms of lumbopelvic kinematics and stroke force profiles. These profiles were sampled at the start of the session and quarterly intervals during the hour piece.

From this data we were able to quantify the motion of the lumbar spine and pelvis during rowing and relate this to the stroke force profile. The stroke profiles over the one hour piece were then compared to examine the effects of fatigue. This revealed marked changes and increases in the amount of spinal motion during the hour piece suggesting that to maintain stroke force profiles athletes were utilising greater ranges of spinal motion. The relevance of this with regard to low back pain however, requires further investigation.